EN 54-25, ISO 7240-25 and TCVN 7568-25: What Radio-Link Certification Actually Tests

30-SECOND SUMMARY

  • EN 54-25, ISO 7240-25 and TCVN 7568-25 are three labels for one requirement set for radio-linked fire alarm parts.
  • “EN 54 compliant” is not the same as “EN 54-25 certified”. Four questions tell them apart.
  • FireSmart does not hold EN 54-25 or ISO 7240-25 certification for the wireless line today.

Quick answer: EN 54-25, ISO 7240-25 and Vietnam’s TCVN 7568-25 are three national and regional versions of one requirement set. They cover fire detection and alarm components that talk over a radio link instead of a cable. A radio link can fail in ways a cable cannot. The standard tests exactly those failure modes.

One warning: “EN 54 compliant” in a brochure is not the same statement as “EN 54-25 certified”. You can check the difference in about ten minutes. This page explains what the standard tests and how to verify a supplier’s claim, including ours.

One Requirement Set, Three Names

Specifying a wireless fire alarm system anywhere between Europe and Southeast Asia, you will meet the same requirements under three labels.

Standard Scope Where you meet it
EN 54-25 Components of fire detection and alarm systems using radio links. European Economic Area. Consultants elsewhere often use it as a de-facto benchmark.
ISO 7240-25 The international standard for the same radio-linked components. Referenced in national codes across Asia, the Middle East and Africa.
TCVN 7568-25:2023 Part 25 of Vietnam’s national fire alarm standard series, drawn up on the basis of ISO 7240-25:2010. Vietnam. Drafted by the Police Department of Fire Prevention, Fighting and Rescue and published by the Ministry of Science and Technology.

A device engineered for one of the three is engineered against broadly the same physics. A certificate for one is not a certificate for another. A named body issues certification against a named standard, for a named list of devices. We return to this below.

What the Standard Actually Tests

Most brochure copy stops at “meets EN 54”. The standard is far more specific. Its clause list shows what a good wireless system must survive. The requirements fall into six families.

  • Alarm signal integrity. An alarm raised at a detector must reach the panel within the standard’s limits. The system must prove it under test, not in a demo room.
  • Interference and shared airspace. The system must keep working when a similar system from the same manufacturer runs nearby. It must also keep working when unrelated equipment transmits in the same band. These are separate clauses because they are separate failure modes.
  • Loss of link detection. A cut cable announces itself as an open circuit. A silent radio link looks the same as a link with nothing to say. The standard therefore requires the system to detect and report a lost connection.
  • Antenna and path loss. A normative annex covers testing with radio-attenuating rigs and positional attenuation immunity. In plain terms, it proves the link still closes when the path is partly blocked.
  • Independent power source life. Battery life is verified, not claimed. A low-supply condition must raise a fault signal.
  • Environmental and mechanical endurance. Dry heat, cold, cyclic damp heat, steady-state damp heat, SO₂ corrosion, shock, impact, sinusoidal vibration and EMC immunity.
NOTE
The radio-specific clauses exist because silence is ambiguous. Link supervision, antenna testing and path attenuation all trace back to that one problem.

Why the Environmental Tests Matter Most in the Tropics

Buyers in Vietnam, Indonesia, the Philippines or the Gulf should read the environmental family twice. The standard separates cyclic damp heat from steady-state damp heat. It also separates operation under those conditions from endurance after them.

This maps onto what a building does to a detector. A car park that swings from 28 °C at dawn to 40 °C at noon is a cyclic damp-heat problem. A coastal warehouse that sits at high humidity for eight months is a steady-state one. The SO₂ corrosion test matters near industry and heavy traffic.

A supplier who can name which tests their devices passed, and at which severity, has read the standard. A supplier who answers “it’s IP65” has answered a different question. Enclosure ingress rating and environmental endurance are not the same thing.

TIP
Two companion guides cover the detector-level consequences: choosing fire detectors for hot and humid climates and photoelectric smoke detectors in the tropics.

“EN 54 Compliant” vs “EN 54-25 Certified”: How to Verify a Claim

Four questions separate a real certificate from a marketing sentence. Each takes a few minutes. Ask them of every supplier, including us.

  1. Which body issued it, and what is the certificate number? A notified or accredited body issues certification with a traceable number. “Designed to”, “in line with” and “compliant with” are not certificates.
  2. Which devices does it cover? Certification scope is a device list, not a brand. A certified control panel does not certify the detectors, sounders or repeaters around it.
  3. Which edition and year? Standards are revised. Ask which edition the testing used. Ask when the certificate expires or is due for surveillance.
  4. Can you send the scan? Marking and documentation are themselves clauses of the standard. A supplier who cannot produce the document has told you something useful.

The same four questions work on national schemes: BIS in India, SDPPI/SNI in Indonesia, a Certificate of Circulation in Vietnam. Our certifications and compliance hub shows where each stands for our product line.

Where FireSmart Stands Today

Here is the answer, in the same words as our wireless fire alarm systems guide. FireSmart does not hold EN 54-25 or ISO 7240-25 certification for the wireless product line at this time. Certification status is under active review for selected target markets.

We work to the Vietnamese route. TCVN 7568-25:2023 covers the radio-linked components. TCVN 7568-14:2025 covers system design and installation. Devices such as our wireless fire alarm control panel are built and sold domestically under this framework.

We publish the full text of TCVN 7568-25:2023 in Vietnamese on this site, with the clause and test list summarised above. You can read the requirements instead of taking our word for the summary.

Does your project need a certification we do not hold? Tell us which one and for which market. That answer helps both of us more than a vague yes. Reach the engineering team through contact us.

Frequently Asked Questions

Is EN 54-25 mandatory outside the European Economic Area?

Generally no. Outside the EEA, national codes govern. Many reference ISO 7240-25 or a national adoption of it, not EN 54-25. Consultants still use EN 54-25 as a specification benchmark. It often appears in tender documents in markets where it carries no legal force.

Does ISO 7240-25 certification automatically mean EN 54-25 certification?

No. The technical requirements are closely related. But a specific body grants certification against a specific standard for a specific device list. Treat them as separate documents. Ask for the one your authority having jurisdiction requires.

What is the Vietnamese equivalent of EN 54-25?

TCVN 7568-25:2023. It was drawn up on the basis of ISO 7240-25:2010. The full text and clause list are on our TCVN 7568-25 page.

Can a wireless fire alarm system be commissioned and handed over like a wired one?

In principle yes, with one addition. The commissioning record should show radio link supervision and signal margin at every device position, not only detector and sounder function. Our daily, monthly and annual operating guide covers what to record and how often.

Need to put these requirements into a written specification? See our wireless fire alarm system specification guide for clause-by-clause guidance on what to require and how to verify it.

Similar Posts