Manual call point FSM-001
Mua ngay Gọi điện xác nhận và giao hàng tận nơiDescription
The manual call point FSM-001 lets occupants trigger the fire alarm by hand within a FireSmart fire alarm system.
Mount it on escape routes and near exits/landings at a height of 1.4 m ± 0.2 m above finished floor level, so that no point on the escape route is more than 45 m from the nearest call point (up to 150 m between units for outdoor installation).
Key features
- Manual fire alarm activation
- Compatible with FireSmart control panels
- Clear, easy-to-operate design
- Wall mounting
Standards: designed to meet TCVN 7568-11 (manual call point) and TCVN 7568-14:2025 (based on ISO 7240).
Commonly paired with FireSmart’s zone control panel FCP — see the full range in the fire alarm accessories category.
Frequently asked questions about the FSM-001
What is the FSM-001 used for?
It lets people manually raise a fire alarm within a FireSmart fire alarm system.
Which standard does it meet?
It is designed to meet TCVN 7568-11 (manual call point) and TCVN 7568-14:2025 (based on ISO 7240).
How can I get a quote?
Contact FireSmart, a Vietnamese manufacturer of fire alarm devices and systems.
Where should the FSM-001 be installed, and how high?
On escape routes, near exit doors and stairwell landings, at a height of 1.4 m ± 0.2 m above finished floor level, with a clear 0.6 m half-circle in front of the unit. Spacing should not exceed 45 m indoors (150 m for outdoor installation), per TCVN 7568-11.
Can the call point be reused after it is triggered?
Yes. The FSM-001 has a resettable mechanism — after activation it can be reset and used again without replacing the unit, and its red ABS housing keeps it easy to spot.
Which control panels is the FSM-001 compatible with?
It works with FireSmart’s zone/conventional panels (FCP, FSP) as well as other common conventional fire alarm control panels.













