FIRESMART – Wireless Fire Alarm Manufacturer in Vietnam · Hotline: +84 983 016 201 · Tiếng Việt
FireSmart offers conventional (zone-wired) fire alarm control panels, from the compact FCP (2 to 8 zones) up to the larger FSP (10 to 40 zones). Each zone circuit supports up to 32 detectors, with the panel supervising the wiring and reporting which zone triggered an alarm.
Conventional systems remain the most cost-effective option where cable pathways already exist or are being installed during new construction, and where a small number of zones makes locating the device in alarm straightforward for on-site staff. For buildings where cable runs are impractical, such as heritage structures, occupied retrofits, or multi-building sites, see the wireless fire alarm systems guide for a cable-free addressable alternative, or read the comparison of conventional vs. addressable fire alarm systems to decide which architecture fits a specific project.
Showing all 11 results
The conventional fire alarm control panel FCP from FireSmart is a zone-based panel available in 2, 4, 5 and 8 zones for shops, offices, small workshops and similar premises. Key features 2, 4, 5 or 8 detection zones Up to 32 detection devices per zone End-of-line (EOL) supervision for open/short faults Two NO/NC outputs plus…
FireSmart emergency exit signs provide clear, illuminated directional guidance toward escape routes during a power failure or emergency. Correct placement matters as much as the sign itself: exit signage should mark every stairwell landing and corridor exit, and appear wherever the escape route is not directly visible from the room — with a maximum spacing…
FireSmart emergency lighting provides automatic illumination during a power failure to support safe evacuation of a building. It is typically installed in corridors, stairwells, meeting rooms and open work areas — anywhere general area lighting is needed to move safely once mains power fails, complementing directional guidance from an emergency exit sign FS-EX at doorways…
The simple auto dialer, to be connected to NO/NC, is for dialing phone numbers once having any alarm. Using a SIM module inside, this device can also send SMS to registered numbers. For being faster, SMS will be sent in prior to making phone calls. With LED indicator Using 24V DC supply from the FACP…
The FSP-8L is a conventional (zone-based) fire alarm control panel from FireSmart. It provides 8 zones and can be expanded to 16, 24, 32 or 40 zones; each zone supports up to 32 fire detection devices, making it suitable for medium and large buildings. Key features 8 zones, expandable to 16 / 24 / 32…
The FSL-001 is a fire alarm indicator light for the FireSmart fire alarm system. It provides a clear visual alarm signal, helping occupants identify an alarm condition quickly. Key features Bright LED visual alarm indication Compact wall or ceiling mounting Works with FireSmart fire alarm control panels Simple installation and long service life Where the…
The FSBL-001 combines a fire alarm sounder and a strobe indicator light to warn occupants of a fire condition with both sound and light. Mounting and placement The FSBL-001 is designed for wall mounting in corridors, stairwells and escape routes. Mount at a minimum height of 2.0 m from the finished floor to the device,…
The manual call point FSM-001 lets occupants trigger the fire alarm by hand within a FireSmart fire alarm system. Mount it on escape routes and near exits/landings at a height of 1.4 m ± 0.2 m above finished floor level, so that no point on the escape route is more than 45 m from the…
PRODUCT DESCRIPTION 30-SECOND SUMMARY The FSS-001 is an optical smoke detector for early fire warning. It responds to a fixed smoke concentration threshold. It works with the FCP and FSP conventional control panels. The optical smoke fire detector gives reliable early warning of a fire. It responds to a fixed smoke concentration threshold in the…
The FS-IO is an input/output expansion module that adds programmable outputs to conventional FireSmart fire alarm control panels. Key features Adds programmable outputs to conventional panels Input/output expansion Compatible with FireSmart conventional control panels Standards: designed to meet TCVN 7568-14:2025 (based on ISO 7240). Frequently asked questions about the FS-IO What is the FS-IO used…
30-SECOND SUMMARY The FSH-001 gives early warning on a rate of rise or a fixed temperature threshold. Class A2R or BR per ISO 7240 / TCVN 7568-14:2025-5. Protected area: a circle of 15 m diameter. Do not install it facing heaters, above stoves or ovens. The fire detector gives reliable early warning of a fire….
Hotline: +84 983 016 201
Tiếng Việt
