The FireSmart wireless fire alarm system is the best choice for small buildings. Those are villas, small hotels, restaurants, etc. And this is the perfect choice for the old residents house that haven’t got such a system.
The FireSmart wireless system is especially suitable for use in locations, in which the wiring of fire detectors is impossible or undesirable. FireSmart is based on mesh technology, which maximizes communications redundancy and thus matches the security and reliability of a cable-based solution. Within the mesh network, each wireless device communicates with the adjacent devices. This means that at least two redundant paths are available at any time for transmitting information.
The signal is transmitted via radio waves, doesn’t use the traditional signal cable. This helps saving labour cost and installation time. We don’t need to cut the ceiling nor the wall for cable routing. So it doesn’t affect the house’s structure and architectual beauty.
The control panel can connect to 250 programable addressable fire alarm devices. There are 02 onboard output relays for controling the external devices in case of fire. The WCP1 control panels can be connected togethers to make a network of 64 panels. A 4G SIM module is built-in so the control panel can connect to cloud server.
The wireless smoke detector is confort to EN-54 Standard. And the wireless fire alarm devices made by FireSmart meet all the common international regulations of using radio waves. Wireless heat detector meets the standard of EN-54-5. All the wireless smoke and heat detectors are addressable. Users can name every device themselves by software in PC or APP in handphone or directly on the controlpanel.
The combination box with Horn – Siren and Manual Call Point works as a router between floors. They collect signal from detectors around them and transmit to the controlpanel. This help the system to be stable even if it is installed in a building with complicated structure.
Each detector use power from an ordinary 9V battery which can be found easily in any convenient store. One battery is enough for more than 2 years. When the volume of the battery is under 20%, the device will alert user by LED lights and repeated sound 2 months before it run out of power. Using the modern design and applying newest electronic technology help FireSmart devices opporate stably in long time. Warrantee is valid until 36 months after first use.
Installation in countries show the fact that, FireSmart wireless system works well in poor signal conditions. Innovation technology researched by FireSmart help signal from devices are transmitted via multi-way network, and it make the system works better. Once a fire emerges, the alert shall be sent to everywhere in the buildings. Emergencty situation will be activated, elevator go down to 1st floor, pressurization fan will be turned on, ect… as programmed by user.
The emergency alert is not only send to Horn and Lamp, but also sent to user’s handphone by SMS, voice call and APP notification. Even when users are not at home, they can believe that safety of the house is under control.
- Fully compliant with and tested to EN 54-2, EN 54-4 and EN 54-25;
- Compatible with wide range of wireless detection devices;
- Adjustable sounder delay time;
- Two monintor outputs (expandable to 16);
- Connecting up to 250 addressable wireless detection devices;
- Fully programmable using simple menu
- Programmable using mobile APP
- Analog design using FireSmart’’s advanced protocol for fast and robust communication
- 4 lines x 20 characters LCD display
- Network capabilty of up to 64 panels
- Auto learn feature
|Supply Voltage||120VAC (50hz/60hz) or 220VAC (50hz/60hz)|
|Power supply DC rating||24V 1.3 Amps|
|Main supply fuse||1.3 Amp 250V|
|Dimension||240mm(W) x 300mm(H) x 75mm(D)|
|Fault contact rating||30VDC 1 Amp|
|Fire contact rating||30VDC 1 Amp|
|NO/NC output rating||0.5A per output (max 1.6A over all outputs)|
|Operating humidity||95% (non condensing)|
|Operating temperature||-5°C to +65°C|